Lowongan Kerja Terbaru Dari PT United Tractors Pandu Engineering 2023

Sebelum anda bekerja sama, bersama perusahaan yang anda lamar, maka anda akan menghadapi banyak rintangan serta tantangan yang akan diberikan pihak perusahaan terhadap diri anda, hal ini bertujuan agar perusahaan dapat menemukan kandidat terbaik yang dapat mengembangkan kinerja dari pada perusahaan serta dapat meningkat peforma yang dimiliki oleh pihak perusahaan. Hal-hal yang biasanya diberikan perusahaan terhadap pelamar biasanya yaitu melakukan tahap seleksi. Tahap seleksi biasa yang paling sering dilakukan adalah Wawancara, psikotes, TPA (Tes Potensi Akademik), dan masih banyak lagi. Dan untuk itu disarankan terhadap sobat, sebelum anda mencampakan lamaran anda, anda terlebih dahulu telah meningkatkan pengetahuan yang anda miliki, serta berlatih dalam menghadapi tahapan seleksi yang paling sulit, seperti wawancara. Sehingga ketika anda menghadapi tahapan seleksi tersebut, teman tidak akan mengalami kendala, akan tetapi membangkitkan kepercayaan diri anda serta potensi yang anda miliki.

Dan berikut adalah keterangan yang dimiliki oleh pihak perusahan sebagai berikut.

PT United Tractors Pandu Engineering (PATRIA) berdiri tanggal 8 februari 1983. Pada awalnya dibangun untuk memenuhi meningkatnya permintaan pembangunan industri di Indonesia. Sebagai perusahaan terkemuka di Indonesia di bidang manufaktur alat berat & engineering, PATRIA memberikan solusi sesuai dengan kebutuhan spesifik pelanggan melalui terobosan desain dan inovasi dalam rangka mengoptimalkan produktifitas anda. Dilengkapi dengan teknologi terbaru pada sistem manufaktur dan teknisi yang berpengalaman, PATRIA memastikan produksi berjalan dengan lebih cepat, efisien dan dapat diandalkan. PATRIA juga memberikan nilai lebih dengan memberikan layanan after sales service.

Kini pihak perusahaan telah membuka rekrutmen terbaru dengan ketentuan dan persyaratan yang dibutuhkan adalah sebagai berikut.


Lowongan Kerja Terbaru Dari PT United Tractors Pandu Engineering 2023

1. Remanufacture Process Engineer

Job Description :

Perform production capacity calculations & analysis to become the basis for production planning by considering the availability of area, equipment and man power

Arrange production rate & lead time

Perform business process analysis & plant layout, so as to achieve optimal production.


Requirements :

Bachelor Degree majoring Industrial/Mechanical Engineering

Have the ability to think analytically and eager to learn new things

Able to use 3D CAD/CAE design software, such as Solidworks, FEA, ProE, AutoCAD

Able to coordinate and communicate in a team

Able to adapt to the work environment


2. Remanufacture Product Development Engineer

Job Description :

Analyzing bill of materials for new products and reviewing existing bills of materials.

Creating new products that match customer expectations.

Prepare and monitor product development (components) according to business needs

Developing parts/components Sourcing components for the needs of component developers


Requirements :

Bachelor Degree majoring in Mechanical/Materials Engineering

Able to use Solidworks software

Have the ability to think analytically and eager to learn new things

Critical and visionary thinking and high initiative


3. Design Engineer

Job Description:

Make a complete and detailed product design

Ensure that the product can be produced and meet customer needs by considering quality, time and cost


Requirements:

Bachelor majoring in Mechanical Engineering

Capable of using to use 3D design software, such as Solidworks, AutoCAD, etc.

Capable of doing Finite Element Analysis

Have good communication skills, fast learner, and proactive

Willing to be placed in Cikarang, Jawa Barat.


4. Supply Chain Management Engineer

Job Description :

Design process flow of inventory and its usage

Establish capacity planning and budgeting related to supply chain

Improve process efficiency and productivity

Conduct Supply Chain study to support production process

Maintain fabric packing inventory, shell and its usage


Requirements :

Bachelor Degree majoring in Mechanical or Industrial Engineering

Possess knowledge & skill on Solidwork, Pro E or AutoCAD tools

Good communication & analytical thinking skill


5. Jig & Fixture Designer

Job Description:

Designing jig & fixture

Monitoring the jig & fixture production process

Improving existing jig & fixture design


Requirements:

Diploma degree majoring in Mechanical Engineering

Proficient in Solidworks & AutoCAD

Capable of using Ms. Office

Capable of doing Finite Element Analysis

Have good communication and interpersonal skills

Willing to be placed in Cikarang, Jawa Barat.


6. Production Planning and Control (PPC)

Job Description:

Develop and implement Quality Procedure & Policy to ensure that all production meet predetermined Quality standards


Requirements:

Diploma degree majoring in Engineering

Attention to detail and has idealism in the implementation of aspects of quality

Willing to be placed accross Indonesia.


7. Quality Officer

Job Description:

Develop and implement Quality Procedure & Policy to ensure that all production meet predetermined Quality standards


Requirements:

Diploma degree majoring in Engineering

Attention to detail and has idealism in the implementation of aspects of quality

Willing to be placed accross Indonesia.


8. Inventory Analyst

Job Description:

Supporting, monitoring, and controlling Raw Material Parts readiness and inventory for production needs

Assisting in solving problems regarding Raw Material Parts fulfilment for production needs

Supporting the fulfillment of Consumable Goods’s need for all Plant.


Requirements:

Diploma degree majoring in Engineering

Capable of using Ms. Office (Ms.Word, Ms. Excel, & Ms. Powerpoint)

Have good communication skills and ability to think analytically

Willing to be placed in Cikarang, Jawa Barat.


9. Command Center

Job Description:

Research and manage information/ conclusions/ insights from existing data systematically from the company’s ERP system

Conduct and formulate periodic reviews of the developed dashboard

Provide suggestion or recommendations on business operations based of the results of data processing


Requirements:

Bachelor degree in Engineering

Have the ability to think analutically and systematically

Proficient in ERP and Data Management

Willing to be placed in Cikarang, Jawa Barat.


10. Support & Controller Head (Administration Dept. Head)

Job Description:


Coordinate, implement, and control all administration department activities effective and efficient according to:

Asset Management

Finance, Cashflow, and Accounting Management

Human Resource Management

Environment, Safety, and Healthy Management

Internal and External Relation Management


Requirements:

Bachelor degree in Industrial Engineering, Management, or Accounting

Proficient in Ms. Office

Have good knowledge and skill according to people, finance, accounting

Have good analytical thinking, communication and coordination skills in a team

Placement: Across Indonesia


11. PPC – Cost Control Staff

Job Description:


Coordinate, implement and control all production plant activities effectively and efficiently, related to cost control, which includes:

Check the elements forming the cost before carrying out the technical completed (TeCo)

Analyzing differences in standard costs (Bill Of Materials, routing)

Prepare a cost variance analysis report (on the difference between standard vs actual)

Availability of WIP


Requirements:

Bachelor degree majoring in Mechanical Engineering or Industrial Engineering

Proficient in Ms. Office

Have a good knowledge according to cost control

Have good analutical thinking

Placement: Cikarang, Jawa Barat


12. Internal Auditor

Job Description:

Perform annual audit work plan by focusing on risky areas to test and evaluate the implementation of internal controls in accordance with company policies

Conduct Desk Audit / Pre Audit and Field Audit

Compile and make a report on the results of the audit and submit the report to the President Director

Follow up on audit results, and perform special inspections if there is a request from the Board of Directors.


Requirements:

Bachelor degree majoring in Accounting or Industrial Engineering

Adaptive and able to learn new things

Have an understanding of business processes & risk management

Understand basic tools & audit techniques

Proficient in using SAP system

Have good analytical thinking & problem solving skills

Have good communication & public speaking skills

Placement: Cikarang, Jawa Barat


13. Strategic Innovation

Job Description:

Coordinate improvement and innovation activities through innovation conventions

Coordinate with the PATRIA Development Center and corporate planning in preparing the potential project module/matrix


Requirements:

Bachelor degree majoring in Industrial Engineering

Have willingness to learn new things and good interpersonal skill

Able to multitask

Placement: Cikarang, Jawa Barat


14. Corporate Reporting

Job Description :

Analyze the company’s Financial Statements Prepare various reports starting from ASPACK, BAPEPAM, BPS, & Management

Review, and ensure that all reports can be submitted on time

Collaborate with the Finance department regarding the preparation of reports


Requirements :

Bachelor Degree majoring in Accounting

Proficient in Ms.Excel

Familiar with SAP and understand PSAK

Having strong analytical skills


15. Testing Engineer

Job Description :

Testing design : Collect testing goals, variables, testing standard; Prepare testing methodology; Prepare testing equipment & facility d Prepare testing schedule

Conduct unit testing (performance/system/functionally)

Document the result of product test

Interpret/analyze test result and patterns (with engineer)

Testing report

Manage and maintain testing tools and equipment


Requirements :

Bachelor Degree majoring in Instrumentation Engineering, ELINS, Electro-Instrumentation, or Physical Instrumentation Engineering

Able to design instrument systems in the testing process

Able to analyze and evaluate data testing testing results

Proficient in Ms. Office

Have good analytical thinking. communication and coordination skills in a team

Have a passion for learning new things and an interest in doing research


16. Structure-Prototype Engineer

Job Description :

Prototyping production planning (schedule, area, tools, etc)

Prototype preparation – Collect prototype design (fabrication, component, vendor, etc) & Design and provide jig & fixture, tools, test bench, etc

Run and manage prototyping process 4. Manage and maintain workshop


Requirements :

Bachelor Degree in Mechanical Engineering

Cabable to use 3D design software (Solidworks, AutoCAD)

Proficient to use Ms. Office

Capable to read and make technical drawings

Have good analytical thinking. communication and coordination skills in a team

Have a passion for learning new things and an interest in doing research


17. Electric Engineer (Instrumentation & Control)

Job Description :

Provide engineering support relates to OQA/OC such as inspection for electric

Develop Electrical Deliverable such as : Electrical Equipment Specification, Electrical Equipment Datasheet, Electrical calculation, etc.

Guide a team of drafter in developing various Electrical & Instrumentation


Requirements :

Bachelor Degree majoring in Instrumentation Engineering, Electro-Instrumentation

Have a strong knowledge related to electric

Have good analytical thinking, communication and coordination skills in a team

Have a passion for learning new things and an interest in doing research


18. Power Train Engineer

Job Description :

Identifying powertrain design

Run and manage powertrain development

Document the result of product

Interpret/analyze test result and patterns (with engineer)

Manage and maintain powertrain product


Requirements :

Bachelor Degree majoring in Mechanical Engineering

Cabable to simulate software such as Matlab & Siemens Nx

Proficient to use Ms. office

Capable to read and make technical drawings

Have good analytical thinking. communication and coordination skills in a team

Have a passion for learning new things and an interest in doing research


19. Business Technology Development

Job Description :

Conduct business aspects analysis of the product being developed

Manage development cost and budget

Manage product development collaboration with group

Sourcing new component for product development

Manage product lifecycle


Requirements :

Bachelor Degree majoring in Industrial Engineering

Proficient in Ms. Office

Have strong research and strategic analysis skills

Have good analytical thinking, communication and coordination skills in a team

Have an interest in doing research


20. Data Scientist Associate

Job Description :

Identifying potential growth opportunities through data exploration & analysis

Collaboratively work with stakeholders to define problem and to provide actionable insight based on data-driven approached

Developing scalable data products (predictive model, prescriptive dashboard, etc.) that drives businesses/ products growth


Requirements :

Bachelor Degree majoring in Statistics, Engineering, Sciences,

Economics, or Mathematics

Proficient in SOL or Python

Have a strong analutic skill


21. Vendor Management Associate

Job Description :

Conduct analysis & perform work activities in the field of overseas purchasing

Analyze & perform work activities in the field of strategic sourcing expeditions, consumables, & bulk parts

Plan and monitor all procurement activities based on plans to

purchase goods with a list of needs from inventory and lead time from vendors/suppliers to run efficiently and effectively


Requirements :

Bachelor Degree majoring in Industrial Engineering/Mechanical Engineering

Have strong negotiation skills

Proficient in English both oral and written

Preferably have the ability to speak Mandarin

Understand SAP


22. Tax Analyst

Job Description :

Checking & validating all transactions related to the company in accordance with applicable policies, systems and procedures

Preparing and providing accurate and timely financial reports for the company in accordance with generally accepted accounting standards in Indonesia

Ensuring the formulation and payment of corporate taxes in accordance with applicable policies


Requirements :

Bachelor Degree majoring Finance/Accounting/Tax

Having work experience min. 1 year


Tertarik untuk mendaftar silahkan lakukan pendaftaran melalui link berikut. DAFTAR

Dapatkan Info Lowongan kerja setiap hari dengan cara join Telegram : https://t.me/pusatkerja2

Catatan :

Diharapkan terhadap seluruh sahabat, untuk membaca keseluruhan kebutuhan dan kriteria yang dibutuhkan, sehingga teman-teman ketika mencantumkan lamaran anda dapat dengan teliti dan memahami apa saja yang diperluhkan ataupun yang dibutuhkan oleh pihak perusahaan.

Penting :

Untuk teman-teman yang membutuhkan informasi lowongan kerja lainnya silahkan kunjungi beranda  Lowongan Kerja : http://pusatkerja2.com/

Diharapkan sahabat untuk mengikuti Instagram : @pusatkerja

Posting Komentar

0 Komentar