Lowongan Kerja Terbaru dari PT Solusi Energy Nusantara Mei 2025

Memiliki atau mendapatkan pekerjaan merupakan kebutuhan utama bagi setiap orang/masyarakat, dengan adanya pekerjaan, kita dapat memenuhi kebutuhan kita sehari-hari baik itu kebutuhan pokok ataupun style yang ingin kita tampilkan, akan tetapi untuk mendapatkan pekerjaan bukanlah hal mudah, banyak pelamar yang telah mencantumkan berkas lamaran mereka terhadap perusahaan akan tetapi belum juga menerima panggilan kerja. Hal itu dikarenakan berkas lamaran yang cantumkan terhadap perusahaan memiliki kesalahan ataupun berkas yang anda lemparkan tidak sesuai dengan kriteria/kebutuhan yang dimiliki oleh pihak perusahaan. Dalam hal ini anda disarankan terlebih dahulu sebelum anda melemparkan berkas lamaran anda terlebih dahulu anda harus mengetahui kriteria apa saja yang dibutuhkan oleh perusahaan ataupun skill yang dibutuhkan, dengan begitu anda akan mengetahui apakah skill dan kriteria yang anda miliki sesuai dengan keinginan perusahaan. Dan apabila hal tersebut tidak sesuai dengan keinginan anda, akan tetapi anda ingin masuk dalam perusahaan tersebut, maka jauh-jauh hari anda telah mencari tahu tentang perusahan tersebut, sehingga ketika dibukanya rekrutmen anda tidak akan mengalami kendala.

PT Solusi Energy Nusantara (SENA) yang didirikan di Jakarta pada tanggal 20 April 2015, merupakan anak perusahaan dari PT PGAS Solution, perusahaan terkemuka di Indonesia dalam bidang transmisi dan distribusi gas bumi. Tujuan dari pendirian SENA adalah untuk memberikan layanan jasa engineering di industri oil dan gas.

Dan kini pihak perusahaan telah membuka rekrutmen terbaru dengan persyaratan atau kebutuhan pendaftaran adalah sebagai berikut.

Lowongan Kerja Terbaru dari PT Solusi Energy Nusantara Mei 2025

1. Senior Process Safety Engineer

Requirements :

• Bachelor of Chemical Engineering/Nuclear Engineering/Mechanical Engineering
• Minimum 10 years experience in oil & gas or petrochemical projects.
• Experienced as a Process Safety Engineer in Oil & Gas, upstream & downstream, or petrochemical projects.
• Experienced in offshore projects.
• Experienced in designing and planning safe conditions based on the Process Safety Concept, as well as safety equipment in an oil & gas facility, both upstream and downstream.
• Experienced in creating process safety design basis, conceptual designs of process safety, specifications, simulations, calculations, data sheets, and standard drawings.
• Experienced in making QRA, SCE, HAC and other studies related to process safety.
• Have the ability to use software related to process safety engineering such as PIPENET, FLARESIM, PHAST and other required software.
• Have the excelent knowledge of Codes & Standards related to process safety.
• Have the ability to communicate with clients and colleagues.
• Can make project implementation plans of process safety, both schedules and the required manpower and tools.

2. Senior Process Engineer

Requirements :

• Bachelor of Chemical Engineering
• Minimum 10 years experience in oil & gas project or petrochemical
• Have experience to develop main deliverable (process design basis, shutdown phylosophy, operating & control phylosophy, process description, Process Design Criteria, cause & effect, etc)
• Have experience to perform dynamic simulation, pipeline hydrolic simulation using OLGA, Pipesim)
• Have an excellent knowledge of internationally recognized Codes and Standards related to Process Discipline

3. Senior Civil & Structure Engineer

Requirements:

• Bachelor of Civil Engineering.
• Minimum 15 years experience in oil & gas or petrochemical projects.
• Experienced in designing and planning Civil and Structure in an oil & gas facility, both upstream and downstream.
• Have experience to develop main deliverable (Civil & Structure design basis, specifications, calculations, MTO, and Bill of Quantity (BQ), and TBE).
• Have Experience to perform Concrete & Steel Structure calculation including Foundation Analyses using STAAD Pro and spreadsheet for Foundation.
• Have an excellent knowledge of International and National recognized Codes and Standards related to Civil & Structure Discipline.
• Can control all Civil design activities throughout the project
• Have capability to manage a team up to 50 personnel
• Can make project implementation plans in the I&C field, both schedules and the required manpower and tools.

Baca Juga :

• Lowongan Kerja Pertambangan SMA SMK D3 S1 PT Kalimantan Aluminium Industry Mei 2025
• Lowongan Kerja Pertambangan Mineral Alam Abadi Group Mei 2025
• Lowongan Kerja Pertambangan SMA SMK Diploma Sarjana PT Bara Indah Sinergi Mei 2025
• Lowongan Kerja SMA SMK Diploma Sarjana PT Garudafood Putra Putri Jaya Mei 2025
• Lowongan Kerja Terbaru dari PT Timas Suplindo (Timas) Mei 2025

4. Senior Offshore & Marine Engineer

Requirements:

• Bachelor of Ocean or Civil Engineering.
• Minimum 10 years experience in oil & gas or petrochemical projects.
• Have experience to perform Inservice Analysis (Inplace, Seismic or Fatigue Analysis) and Prexsevice Analysis (Loadout, Transportation, or Lifting Analyis).
• Have experience to develop Material Take Off for Offshore Structure.
• Have experience to develop Weight Control Report.
• Have experience to review and apply the Soil Test Data for design/analysis.
• Have excelent knowledge of Internationally recognized Codes and Standards related to Offshore Structure Discipline.
• Have capability to perform sketch and to review Offshore Structure drawings.
• Fluent in English skills both written and verbal
• Have a good health record.

5. Senior Piping Engineer

Requirements :

• Minimum S1 in Mechanical Engineering
• Minimum 10 years experience in oil & gas or petrochemical projects.
• Experience as a Piping Engineer in an LNG regasification facility project is preferred.
• Experienced in designing and planning Piping equipment in an oil & gas facility both upstream and downstream.
• Experienced in making basic piping design, conceptual design of piping, specifications, calculations, datasheets, standard drawings, construction & installation engineering, FAT, Site Acceptance Test, Precommissioning & Commissioning.
• Experienced in piping stress analysis
• Have the ability to use software related to piping engineering such as Caesar II and other required software.
• Have knowledge of Codes & Standards related to piping
• Can control all piping design activities throughout the project.
• Can make project implementation plans of piping, both schedules and the required manpower and tools.
• Fluent English skills both written and verbal . Have a good health record

6. Senior Pipeline Engineer

Requirements :

• Minimum Bachelor’s Degree in Engineering
• Minimum 10 years experience in oil & gas or petrochemical projects.
• Experience as an onshore and offshore Pipeline Engineer in an LNG regasification facility project is preferred.
• Experienced in designing and planning onshore and offshore Pipeline equipment in an oil & gas facility, both upstream and downstream.
• Experienced in making basic pipeline design, conceptual design of pipeline, specifications, calculations, datasheets, standard drawings, construction & installation engineering, FAT, Site Acceptance Test, Precommissioning & Commissioning.
• Have the ability to use software related to pipeline engineering such as Caesar II, Autopipe and other necessary software. . Have knowledge of Codes & Standards related to pipelines
• Have the ability to communicate well with clients and colleagues.
• Can make project implementation plans in the pipeline sector, both schedules and the required manpower and tools.
• Can lead & organize engineers in carrying out several projects at the same time so that work targets can be met

7. Senior Instrument & Control Engineer

Requirements :

• Minimum S1 in Electrical Engineering/Physics
• Minimum 10 years experience in oil & gas or petrochemical projects.
• Experience as an instrument & Control engineer in an LNG regasification facility project is preferred.
• Experienced in designing and planning Instrument and Control (I&C) systems in an oil & gas facility, both upstream and downstream.
• Experienced in creating l&C design basis, conceptual design of l&C, specifications, calculations, datasheets, standard drawings, construction & installation engineering, FAT, Integrated Site Acceptance Test, Precommissioning & Commissioning.
• Have the ability to use software related to l&C engineering such as Instrucal and other required software.
• Have knowledge of Codes & Standards related to instrumentation
• Can control all I&C design activities throughout the project.

8. Electrical & Instrument Engineer

Requirements :

• Pengalaman minimal untuk S1 4 tahun dan D3 8 tahun
• Memiliki kemampuan dalam pelaksanaan aktivitas electrical dan instrument engineer seperti single line diagram, spec instrument, load flow analysis shorth circuit analysis, dan lain lain
• Familliar dengan IEC, IEEE, NEC, API, ISA, NEMA, ANSI, dan standar lainnya
• Dapat mengoperasikan software MATLAB, SIMULINK, AutoCAD, PSPICE, ETAP, EPLAN, SPI, dan software analysis lainnya

9. Drafter TFM

Requirements :

• Pengalaman minimal 1 tahun untuk S1 dan 3 tahun untuk D3
• Mampu mengoperasikan software antara lain autoCAD, REVIT, Solidworks, dan software yang relevan.
• Memiliki keahlian dalam pembuatan dan pengeditan gambar teknik untuk disiplin mechanical, Piping, dan civil structure.
• Mampu membaca dokumen teknik seperti PFD, P&ID, Isometric Drawing, SLD dan detailed engineering drawing

10. Drafter Engineer

Requirements :

• Pengalaman minimal 1 tahun untuk S1 dan 3 tahun untuk D3
• Mampu mengoperasikan software antara lain autoCAD, REVIT, Solidworks, dan software yang relevan.
• Memiliki keahlian dalam pembuatan dan pengeditan gambar teknik, untuk disiplin mechanical, Piping, dan civil structure.
• Mampu membaca dokumen teknik seperti PFD, P&ID, Isometric Drawing, SLD dan detailed engineering drawing

11. Pengawas Konstruksi

Requirements :

• Pengalaman minimal 2 tahun untuk S1 dan D3 Minimal 5 Tahun
• Memiliki sertifikat penunjang pengawasan konstruksi atau packlaring pengalaman kerja proyek sebagai supervisor/pengwas konstruksi
• Familliar dengan API, ASTM, ASME, JIS, NACE, dan lain lain
• Terbiasa mengontrol schedueling proyek
• Bersedia di tempatkan di Pangkal Batam dan di daerah Sumatera bagian lainnya

Cara Mendaftar :

Berminat untuk melamar silahkan kirimkan CV dan berkas lamaran anda ke alamat email :

recruitment@pt-sena.co.id

🔔 DAPATKAN INFO LOKER SETIAP HARI DENGAN CARA JOIN
📌 Telegaram : Pusatkerja2
📌 WhatsApp : Pusatkerja2
📌 Telegram : Lokerterbaru27
📌 Instagram : Pusatkerja2

Dan bagi teman-teman yang ingin mendapatkan informasi lowongan kerja lainnya, sesuai keinginan anda silahkan cek di link.

www.Pusatkerja2.com